Telge Återvinning
Stone band
- Standard stone tape for windshifter
- For materials below 100 mm
- Possible to add end roll magnet
| Machine model | Norditek windshifter, Norditek eddy current magnet |
|---|---|
| Type of material | For heavier materials |
More spare parts
-
Holder for more sieve baskets
- holder for more sieve baskets on the machine
-
Side protection
- prevents light material from blowing off the conveyor belt
- for light materials e.g. plastic -
Container adapter
- adapter keeps hose in place in the container
-
Cutting plate for roller
- automatically clears material around the distribution roller
- e.g. from VHS cassettes and cords
- avoids stock-outs/breakdowns -
Actuator upgrade kit
-hydraulic actuators for gap adjustment windshifter
-reliable and strong construction for trouble-free production -
Suction nozzle
- adapted with brackets for intermediate fraction belts on Norditek flipflow screen
-
Stainless steel sheets
- stainless steel plates on fine and intermediate conveyors
- for the collection of magnetic scrap -
Guide plates
- plates to guide light material down to the accelerator
- reduces contamination
- improves the working environment on the walkway -
Dust control systems
- improves the working environment
- water mist binds the dust particles -
Hand nozzle
- hand nozzle for hose
-
Stone brake for lighter materials
- reduces wear and tear on the over-fraction conveyor
- suitable for stumps
- smaller stone fraction -
Sieve plate for crushing tires
- sieve plate optimal for crushing tires
-
Plough
- is used for better dispersion of the material
- provides more efficient separation -
Remote control
- on & off machine
- change rotor direction
- give sound signal
- open rotor door
- running the machine in caterpillar mode only -
Stars wear parts
- For soils and wood waste
- Available in PUR (polyurethane) for sticky materials
- Available in rubber for dry materials
- Capable of high capacity
- Different sizes and number of fingers depending on the material
- Original spare parts from Backers
- Please note that different materials are handled with different dimensions -
HD Output belt
- heavy fraction discharge conveyor
- with reinforced chassis and dam plates
- larger drive and turning rollers
- thicker and cut-resistant mat -
HD Rotor
- crushes high-wear materials
- minimizes maintenance time and significantly increases operating hours -
Filling pump electric
- simplifies refuelling
-
First aid kit
-
Output belt
- is used instead of the discharge chute
- for greater stack height on the light fraction -
Roof hydraulics
- reduces injury risk and cleaning needs
- protects the hydraulic system -
Oil heaters. Diesel fuel
- engine and hydraulic oil heaters
- diesel operation -
Non-magnetic damping pads
- important when using an overband magnet
-
Scraper
- clears the accelerator of material
- provides better sorting
- reduces the need for cleaning -
Non-magnetic damping plates
- covers 100 % of the overhead conveyor
- important for future use of the overband magnet -
Suction nozzle XL
-adapted with brackets for intermediate fraction belts on Norditek flipflow screen
-
Brush under feeder
- the brush keeps the lamella feeder clean in damp and muddy conditions
-
Light pole
- for a better and safer working environment in the dark
- 2 x 50W LED -
HD stone brake
- reduces conveyor wear and tear on oversize fraction
- better sorting of coarse materials -
Discharge plunge
- option for output conveyor
- collects the material
- for larger fractions -
HD door
- hardox lined for less welding time and more run time
- for tough applications -
Oil heater. Electric
- engine and hydraulic oil heaters
- electric drive