Telge Återvinning
Side protection
- prevents light material from blowing off the conveyor belt
- for light materials e.g. plastic
| Machine model | Tana Shark 440 |
|---|
Suitable for Tana's slow-speed crusher but can also be adapted to other waste crushers. Please contact us if you have any questions.
More spare parts
-
Feeding outfeed hopper
- PU plate for reduced wear
- avoids adhesion of sticky materials
- suitable for sound-sensitive environments thanks to reduced noise level -
Belt conveyor
-Galvanized, electrically powered conveyors
-Ideal for high flows and volumes
-Available in belt widths from 450 to 1500 mm
-1200 mm used for light fraction windshifter
600/900 mm used for heavy fraction windshifter -
Non-magnetic damping pads
- important when using an overband magnet
-
Suction nozzle
- adapted with brackets for intermediate fraction belts on Norditek flipflow screen
-
HD Output belt
- heavy fraction discharge conveyor
- with reinforced chassis and dam plates
- larger drive and turning rollers
- thicker and cut-resistant mat -
Hand nozzle
- hand nozzle for hose
-
Oil heaters. Diesel fuel
- engine and hydraulic oil heaters
- diesel operation -
Dust control systems
- improves the working environment
- water mist binds the dust particles -
Stone brake for lighter materials
- reduces wear and tear on the over-fraction conveyor
- suitable for stumps
- smaller stone fraction -
Light pole
- for a better and safer working environment in the dark
- 2 x 50W LED -
Remote control
- on & off machine
- change rotor direction
- give sound signal
- open rotor door
- running the machine in caterpillar mode only -
Rubber stopper
- for the collection of materials
- used with a conveyor -
Electric outriggers
- hydraulic
-
Oil heater. Electric
- engine and hydraulic oil heaters
- electric drive -
HD Rotor
- crushes high-wear materials
- minimizes maintenance time and significantly increases operating hours -
Holder for more sieve baskets
- holder for more sieve baskets on the machine
-
Footbridge brackets
- secures the ladder during inspection
- improves the working environment -
Stone band
- Standard stone tape for windshifter
- For materials below 100 mm
- Possible to add end roll magnet -
Plough
- is used for better dispersion of the material
- provides more efficient separation -
Rubber-coated caterpillar feet
- reduces damage to the substrate
- for steel caterpillar tracks -
HD stone brake
- reduces conveyor wear and tear on oversize fraction
- better sorting of coarse materials -
HD air nozzle
- more powerful air nozzle
- to maintain airflow through deformation
- needed for heavy fractions -
Sieve plate for crushing tires
- sieve plate optimal for crushing tires
-
Power cable/starter cable
-
Stars wear parts
- For soils and wood waste
- Available in PUR (polyurethane) for sticky materials
- Available in rubber for dry materials
- Capable of high capacity
- Different sizes and number of fingers depending on the material
- Original spare parts from Backers
- Please note that different materials are handled with different dimensions -
Brush under feeder
- the brush keeps the lamella feeder clean in damp and muddy conditions
-
Non-magnetic damping plates
- covers 100 % of the overhead conveyor
- important for future use of the overband magnet -
Container adapter
- adapter keeps hose in place in the container
-
Cutting plate for roller
- automatically clears material around the distribution roller
- e.g. from VHS cassettes and cords
- avoids stock-outs/breakdowns -
Scraper
- clears the accelerator of material
- provides better sorting
- reduces the need for cleaning -
Suction nozzle XL
-adapted with brackets for intermediate fraction belts on Norditek flipflow screen
-
Fingers waste box
- Provides stair-step effect
- Turns the material
- Maximizes extraction of fine material